BATTERY & CHARGER TEST

BATTERY TEST


First of all, you will need to locate your battery meter that shows you how much juice your battery has. As you are on the scooter operating it come to a stop with the mobility scooter key still in the on position and look for your battery gauge. The battery indicator can be digital LED lights or an analog amp meter with an orange needle.

 

At a stand-still, take notice of where the battery indicator needle is or how many LED lights you have lit up on your LED meter. It should be fully charged while testing your batteries in this process. While stationary, press or push the levers that make your mobility scooter run. Be sure to be on a flat level surface for best results. If the needle or LED lights decrease rapidly as you begin to move, then your batteries are weak and need to be replaced.

Another effective way of measuring the strength of your mobility scooter batteries is to ride the mobility scooter up a slope grade that is 75% of the mobility scooter capability. A simple 6 degree grade would be ample for almost any mobility scooter. We will want to take notice of how many LED lights or what percentage the needle is on the indicator then ride up the ramp. If your battery indicator is near full and then drops to below half way, this is another good sign that your batteries need to be replaced.

CHARGER TEST


The next most logical choice to make when troubleshooting a power related issue is to make sure that the charger is working properly. Plug your charger in overnight and use your mobility scooter the next day. Next, you will want to read your user manual to determine the maximum distance your mobility scooter can go. If you don’t have your user manual, you can visit Mobility Scooters Direct where each product page contains a downloadable user manual. There should be a page in the user manual that contains the travel range for your mobility scooter which you will need to know. Most new mobility scooters go a long distance on a single battery charge so you might be pleasantly surprised when you find out just how long your scooter can go.

Once you’ve identified your travel range, it’s time to take the scooter for a ride. What you need to do next is simply ride your mobility scooter and keep track of the travel distance. Most manufactures base the mileage of someone that is 140 lbs so if you are over this weight guideline you will not reach the maximum distance with your mobility scooter. Once you have drained the scooter, charge the batteries again overnight and repeat. If you get a similar distance out of your batteries, then your charger is working to its best capacity. If you get a significant less mileage from the day before, you may need to replace the charger with the same specifications as your original charger.



Our team of trained engineers have extensive experience of repairing and maintaining

all makes and models of mobility equipment to the highest standards across the Costa Blanca. 

Escribir comentario

Comentarios: 0